Mac Connection Guide

Guide

1 - Select System Preferences from the Apple menu

2 - Double-Click Network

3 - Select AirPort and Turn Off

Ensure the AirPort is off so that the rest of the configuration goes smoothly.

4 - Click Advanced

5 - Delete Existing ANU Profiles

Delete any existing ANU profile by selecting it and clicking the '-' button.
You should delete any ANU-Access profile since you won't be needing it any more.
Note: The Mac may prefer to connect to ANU-Access instead of ANU-Secure if both profiles exist.

6 - Click + to add a new Profile

7 - Type ANU-Secure (is case-sensitive)

8 - Select Security: WPA2 Enterprise

If 'WPA2 Enterprise' is not presented as an option you should seek Support for the issue.

9 - Enter Uni ID and Password

10 - Select 802.1X: Auto

11 - Tick Remember this network

12 - Click Add

13 - Tick Disconnect from wireless networks when logging out

14 - Click Ok

15 - Click Apply

16 - Turn AirPort on and connect to ANU-Secure

17 - Verify Connectivity

If your connection was successful you should see 'Authenticated via PEAP (Inner Protocol GTC)' in the network preferences window

18 - Verify IP Address ..optional

Click 'Advanced' in the Network preferences window, then select the 'TCP/IP' tab.
Your IP Address should be in the 130.56.x.x range. This can take a few seconds to show up.

19 - Verify Web Access ..optional

A final check is to verify that you can browse to an off-campus website, such as Google